Momentive Amino Silicone Fluids

Product Description
GE 01530 fluid textile softener is a low viscosity non reactive aminofunctional silicone optimized to impart exceptional softness with limpy feel

Application - Textile
GE 01530 has proven to be suitable for cotton, silk, wool, polyester,cotton fabrics and Acrylics. Its emulsion will not stick on the roller

Typical Formulation / procedure
GE01530 -20 Parts
TDA 6 mole -10 Parts
Butyl Carbitol - 3 Parts
Acetic Acid - 0.6 Part
Water - 66.4 Parts

Emulsification:
1. Charge GE01530 into the reactor. Mix for 10 min
2. Add Butyl carbitol mix and TDA6 mix for 20 min
3. Add acetic acid, viscous grease will form.Mix for 20 min.
4. Add water under slow and consatnat speed @ 60 min. Clear emulsion will form.

• Production Capacity: N/A
• Delivery Time: READY STOCK

Product Description
Aminofunctional Silicone Fluid SF 4901 is 100% active amino silicone fluid for use as a textile softner. Since it is functionalised with moisture induced, curable endgroups, it can react either with its own or with the fabric surface to increase the wash resistance and durability of the treatment. It can easily be emulsified to stable micro emulsions, which give durable softness and grabby hand to cotton and a board range of woven and non-woven fabrics.

Key Performance Properties

• Imparts durable softness to fibers and fabrics and garments, preferable to cotton and cotton / synthetic blends.
• the product is easy to emulsify and formulate
• Its amino functionality provides a high affinity to fibers and fabrics.
• The products curable endgroups can increase the durability and was resistance of the treatment by binding either to the substrate of itself.

• Production Capacity: N/A
• Delivery Time: READY STOCK

Aminofunctional Silicone Fluid SF 3830 is a 100% active amino silicone fluid for use as a textile softener. Since it is functionalized with moisture induced, curable endgroups, it can react either with its own or with the fabric surface to increase the was resistance and durability of the treatment. It can easily be emulsified to stable micro emulsions, which give durable softness and grabby hand to cotton and a broad range of woven and non-woven fabrics.

Emulsification instructions are available upon request from Momentive Performance Materials.

Key properties

• Imparts durable softness to fibers and fabrics and garments, preferable to cotton and cotton/synthetic blends.
• The product is easy to emulsify and formulate
• Its amino functionality provides a high affinity to fibers and fabrics
• The products curable endgroups can increase the durability and was resistance of the treatment by binding either to the substrate or itself.

Application:

• Due to its very low use levels Aminofunctional Silicone Fluid SF3830 needs either dilution in a unipolar organic solvent or, preferred, to be emulsified for most applications prior use.
• Formulations of Aminofunctional Silicone Fluid SF 3830 should preferably be applied by forced application systems, like padding or kiss roll to the substrate. However, they can also be applied through dipping both as an emulsion and when dissolved in organic solvents, but there the transfer rate depends strongly on the nature of the substrate and the concentration of the formulation used.
• As the textile industry almost exclusively employs aqueous application techniques, Aminofunctional Silicone Fluid SF 3830, a water insoluble material, must first be emulsified. If mainly softness is targeted micro-emulsification is recommended, for water repellency macro-emulsification is preferred.
• Emulsification guidelines are available upon request from Momentive Performance Materials. These formulations are intended for evaluation purposes only and need to be adjusted and tested for their applicability in the desired application.